Dubond Products India Private Limited

• Light Weight concrete
• Pervious Concrete
• Precast concrete
• Pumped concrete
• Ready-mixed concrete
• Rheodynamic
• Self Consolidating Concrete (SCC)
• Shotcrete ( Guiniting )

• Better Compaction and Finishing by acting as Viscosity Modifier
• Breaks the Salinity of Water by converting them into Salt Crystals
• Chloride free
• Easier Placing
• Higher Cohesion
• Increases Extra Bonding Strength
• Increases Work ability
• Lower water requirement for given Work ability
• Lowers cement content for increase in specified Strength, Workability & Durability
• Reduce risk of Honey Combing
• Reduce risk of Segregation and Bleeding
• Reduce risk of Shrinkage Cracks due to Heat of Hydration
• Reduces the risk of Rusting of reinforcement by breaking the chain of Rust Electrons

• Treat splashes to eyes and skin immediately.
• If accidentally ingested, seek immediate medical attention.
• Keep away from children and animals.
• Reseal containers after use.
• Do not reuse containers for storage of consumable item.

• Canal Lining
• Roads
• Runways
• External Floors
• Bridges
• Columns
• Pre stressed Beams and Piers
• Dams
• Airports
• Roof decks and shell roofs

• Highly efficient curing
• Reduces supervision labour cost
• Curing efficiency more that 90%
• Forms an elastic impervious film to retain maximum moisture cement during curing period
• llows gradual and continuous curing without constant attention
• Simple one coat spray application
• Reduces possibility of shrinkage hairline cracking and crazing Ready mixed and economical

• Duplast CC-RB has been designed to spray application to the newly laid concrete once the surface water has disappeared, a thin film of Duplast CC-RB is then applied to the whole surface using a hand operated spray gun or brush application. Stir well before use.
• After application the area concerned must be protected from rain for at least 2-3 hrs.

• Duplast CC-RB is non toxic and does not normally require any special precaution while handling.
• Fire : Not flammable.
• It is advisable to wear goggles when spraying.
• Inhalation of the spray should similarly be avoided.
• Should excessive skin contact with the compound occur the area of skin should be washed with soap and water. If Duplast CC-RB comes into contact with the eye should be flushed with clean water for ten minutes. If irritation persists, medical attention should be sought.

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

Dubond Products (India) Private Limited is a distinguished leader in the realm of architectural and construction solutions, offering a comprehensive range of high-quality products and services. Specializing in Designer Tiles, Waterproofing Coating, and Industrial Epoxy Flooring, we are committed to transforming spaces and ensuring their longevity.

Our Designer Tiles collection is a testament to our commitment to aesthetics and functionality. Crafted with precision, these tiles not only enhance the visual appeal of spaces but also offer durability and ease of maintenance. Whether it's for residential or commercial projects, Dubond's Designer Tiles provide endless design possibilities.

Our Waterproofing Coating solutions are designed to protect structures from the adverse effects of water, ensuring longevity and structural integrity. We employ advanced technologies to create robust waterproofing systems that are ideal for various applications, including rooftops, basements, and more.

Industrial Epoxy Flooring by Dubond stands as a symbol of strength and resilience. Tailored to withstand heavy foot traffic and industrial operations, our epoxy flooring solutions ensure safety, durability, and easy maintenance.

With an unwavering commitment to innovation, quality, and customer satisfaction, Dubond Products (India) Private Limited is your trusted partner for elevating the beauty and durability of architectural and construction projects.

• Mass concreting works of dams, marine environment and concrete subjected to ground water salt.
• Duplast AIREX is used to produce workable and durable concrete for roads, runways, taxiways, power stations and underground water tanks.

• Controllable rate of addition
• Air entrainment without loss in strength
• Improves cohesion and workability
• Enables water reduction
• Gives good freeze-thaw resistance
• Chloride free
• Reduces permeability
• Reduces segregation and bleeding

• Duplast AIREX has shelf life of one year in manufactures unopened containers protect from frost & direct sunlight.

• As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product is fully cured or dried).
• Do not reuse containers for storage of consumable item.
• Duplast AIREX is a non-toxic and inflammable. When in contact with the skin, it should be washed with cold water.
• If accidentally ingested, seek immediate medical attention.
• Treat splashes to eyes and skin immediately.
• Keep away from children and animals.
• Reseal containers after use.

• Price is indicative and may vary depending on the requirement or design,finish or size of the product.

• Curing external concrete paving For spraying on freshly casted concrete, or newly exposed concrete surfaces after removal of frame work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place.
• For vertical or sloping surfaces as on Towers, Chimneys, Canal Linings, Columns and Beams where curing is difficult or unreliable in terms of un availability of sufficient and continious water supply for curing.
• Used for concreting generally but especially useful for large areas of concrete such as Pavements, Runways and Bridge Decks Duplast CC-WB is not recommended for application where subsequent renders, toppings or coatings are to be applied or on coloured concrete surfaces.

• Avoids messy and repetitive water curing.
• Easy and safe Spray or Brush application.
• Eliminates use of water, hession cloth or sand completely.
• Ensures hard wearing surface - minimizes risk of drying shrinkage cracks and dusty surfaces.
• Facilitates more efficient hydration of cement for greater strength and superior wear
• Improves moisture retention in concrete
• No harmful vapours.
• No risk of erratic or poor curing and ensures hydration of cement efficiently.
• Not a fire hazard.
• One time application
• Prevents rapid water evaporation
• Reduced plastic shrinkage cracks and dusting resistance.
• Safe to use.
• Saves labour.
• Single application forms moisture barrier for whole of the curing period.
• Water based
• White pigmented so easy to identify and Better reflections.

• Duplast CC-WB can be stored in unopened original containers for 12 months from date of manufacture at constant moderate temperatures between 4°C to 40°C. Containers should be kept airtight to prevent surface evaporation.
• Freezing or prolonged to direct heat or direct sunlight must also be avoided.

• Duplast CC-WB is non toxic and does not normally require any special precaution while handling.
• Fire : Not flammable.
• It is advisable to wear goggles when spraying.
• Inhalation of the spray should similarly be avoided.
• Should excessive skin contact with the compound occur the area of skin should be washed with soap and water.
• If Duplast CC-WB comes into contact with the eye should be flushed with clean water for ten minutes.
• If irritation persists, medical attention should be sought.

• price is indicative and may vary depending on the requirement or design,finish or size of the product.

Dubond Non-Shrink Grout Admixture is a premium bonding agent designed to improve the performance of grouts by ensuring a shrinkage-free, durable, and high-strength finish. Perfect for concrete repairs, structural grouting, and applications where long-lasting bonding is crucial, this admixture helps provide a solid, resilient bond that can withstand heavy loads and harsh conditions. With superior performance and reliability, Dubond Non-Shrink Grout Admixture is ideal for both residential and commercial projects.

Key Features:

• Shrinkage-Free Formula: Specifically designed to eliminate the risk of shrinkage during the curing process, ensuring a smooth, stable bond that maintains its strength and integrity.

• High-Strength Bonding: Improves the bond strength of grouting materials, making it ideal for heavy-duty applications and areas with high load-bearing requirements.

• Versatile Use: Suitable for use in a wide range of grouting applications, including concrete repairs, machine base grouting, anchoring, and filling voids in concrete or masonry structures.

• Improved Workability: Enhances the flow and workability of grout, allowing for easier and more even application in tight spaces or difficult-to-reach areas.

• Durable & Long-Lasting: Provides a strong, durable grout finish that resists cracking, wear, and water damage, making it suitable for both indoor and outdoor applications.

• Easy to Use: Formulated for ease of use, this admixture integrates seamlessly with your grout, reducing application time and ensuring optimal results every time.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock